FAQ
Can the product be installed outdoors?
The product is designed for indoor use only.
Can the product use any kind of raw water?
As a rule, the product envisions use of tap water, groundwater, or industrial water. A Muromachi Chemicals representative will test the water quality and provide a reply.
What are the properties of the pure water generated by the system?
The water has conductivity of 1 μS/cm or less.
Can we replace parts ourselves?
Our personnel will handle part replacements since the process requires specialized technical skills.
How many pipe connections are there?
The number of connections varies with the system model. Please contact us for more information.
Can the system’s specifications be changed (can requirements be added)?
Requirements can be added for parts other than those that are already installed. Please contact us for more information.
How much installation space is required?
The system requires 40 cm of vertical space, 60 cm on each side, and 60 cm of space behind it. It should be installed so that the front faces an aisle.
Whom should we contact in the event of an accident or with control questions?
Please contact your nearest sales office.
Tokyo: +81-3-3526-4801
Osaka: +81-6-6393-0007
Fukuoka: +81-92-753-8145
What is the delivery period for a cartridge deionizer resin replacement?
Replacements can be delivered four business days after arrival at the plant. (This may vary depending on the shipping address.)
How much pure water can be obtained with a cartridge deionizer?
Our smallest tanks hold 5 L of resin, and our largest tanks hold 80 L of resin.
The dimensions are (φ×h)(mm) 152×472 to 330×1,387.
How much pure water can be obtained with a cartridge deionizer?
When using tap water, you can obtain about 150 L of pure water with 1 L of resin.
Where do you eat them?
Our stick jellies offer excellent portability, and can be eaten easily without water at home or outside of the home.
When is the most effective time to eat them?
The jellies are food products; unlike medicine, there is no time specification for eating them.
You can eat them whenever you like to suit your daily routine.
How do you eat them?
Cut the top off to open the pack.
Gently push out the contents and eat them straight out of the pack or after transferring the jelly to a bowl.
The jellies are even more delicious when chilled.
*Chew well to prevent choking.
*Be careful when opening the pack, as juice may squirt out.
Is it more effective to eat a lot of jelly?
These jellies are not necessarily more effective when eaten in larger quantities at one time.
Rather than eating a large quantity at once, it is more important to continue eating them over a long period of time.
Can I eat them if I am taking medication?
It is not generally a problem, as the jellies are a type of food, but they may not be suitable for combining with certain medications.
To ensure your safe consumption of the jellies, we recommend consulting your doctor or pharmacist first.
What is a food with nutrient function claims?
A food with nutrient function claims is a food product used to supplement certain required nutrients (vitamins or minerals) that cannot be acquired sufficiently from regular meals. The food is labeled with the nutrient function claim.
What types of products can you manufacture?
We can fill 3-side sealed pouches of jellies, non-alcoholic beverages, or paste, for example.
What sizes can you manufacture?
Liquid filling: 5-100 g
What kinds of ingredients can be mixed in the jellies, non-alcoholic beverages, and paste?
Most of the ingredients are water soluble. We have vast manufacturing experience in this field. Please contact us for more information.
Products manufactured:
Hyaluronic acid, ceramides, royal jelly, CoQ10, placenta, vinegar, ume (Japanese apricot) extract, plant fermented extract, L-carnitine, α-lipoic acid, dietary fiber, ginger, oligosaccharides, turmeric, rosewater, green juice, glucosamine, vitamins, minerals, and others.
How much is the cost?
The cost varies by specification and lot. Please contact us for a quotation based on your specific requirements.
Can you make a sample product?
Yes, we can. Please contact us.
How much lead time is required?
The lead time depends on operating conditions and the progress of current projects. Please contact us.
Where do you make products?
We manufacture products at our company plant in Omuta, Fukuoka, Japan.
After applying Aron Alpha®, the area around the adhesive turns white.
After applying the adhesive, it is common for the area to turn white, known as “whitening.” This whitening is the result of some of the adhesive spreading into the air before curing and hardening in the air, turning to a fine white powdery resin that sticks to the area around it. The following are some guidelines for
preventing this effect:
(1) Do not apply too much adhesive.
(2) Use a faster grade adhesive.
(3) Blow air over the spot for adhesion to let the vapor escape.
Alternatively, you can use a special-purpose curing accelerator to induce instantaneous curing and prevent whitening.
Do not hesitate to consult us for details on more countermeasures.
Aron Alpha® is not sticking. Even if it does stick, it comes off soon after.
Aron Alpha® does not stick to materials such as fluorine resin, polyimide, or PPS (polyphenylene sulfide).
A special-purpose surface preparation agent is needed when using it on materials such as glass, silicon rubber, polyethylene, polypropylene, or polyacetal.
The adhesive strength of Aron Alpha® increases with time. If a load is applied immediately after application, it will detach before it has set or will have a lower final strength. Please give it enough time to cure after application.
If you contact us with details about the adhesion material or other conditions, we can select the appropriate adhesive.
It takes a long time for Aron Alpha® to cure.
Aron Alpha® hardens by reacting with moisture in the air or on the adhered surface. Applying too much will result in a long reaction time and prevent it from hardening. In general, highly viscous products tend to have a thicker adhesive layer that takes longer to cure. Hardening should be improved by adjusting the amount of adhesive used to create a thinner adhesion layer whenever possible.
Curing rates vary by grade even with products of the same viscosity. If you want a product with a different curing rate from the instantaneous adhesive you are currently using, please contact a sales representative.
I want to remove Aron Alpha® I have applied.
Cured Aron Alpha® can be dissolved with Aron Hagashi, a special purpose liquid adhesive remover sold by Toagosei Co., Ltd. (the manufacturer of Aron Alpha®).
Please note, however, that Aron Hagashi may dissolve or degrade the materials bonded to the adhesive as well. Please confirm before your purchase.
For temporary tacking, there are Aron Alpha® products for tacking that dissolve easily with solvent.
*The Aron Alpha 100 series (e.g. 101) does not dissolve with Aron Hagashi.
The spot for adhesion will become very hot. Will the high temperature affect Aron Alpha®?
Regular Aron Alpha® can withstand temperatures up to about 80°C. (Aron Alpha® 911T5 can withstand temperatures of over 100°C.)
Even within this temperature range, the adhesive may come off depending on differences in thermal expansion with the adhered material, when applied to material with high thermal expansion.